SE Breeze-com
Perfectly protects every hinged-arm awning against wind damage
SE Breeze-com
SE Breeze-com, GR 2
Product information
A high-quality articulated arm awning deserves special protection: Using the SE Breeze-com drive is the simplest and most cost-effective way to protect an awning from wind damage. The drive detects the fabric’s vibration, and the awning retracts immediately. Depending on the type, the awning is either tightly closed or a relief run is performed. Fabric elongation occurring over time is detected and compensated. All standard advantages of SELVE drives with electronic limit switch technology are also present in this model.
Parallel operation of multiple SE Breeze-com drives is possible.
SE Breeze-com drives can only be controlled via commeo radio transmitters.
Available in BR 2 (from shaft Ø 50 mm). SE Breeze-com drives are delivered without adapters. Adapters and pluggable connection cables must be ordered separately.
PRODUCT BENEFITS
- Integrated wind detection protects the awning from damage
- Firm closure of the cassette when the articulated arm awning is retracted
- Relief of the upper end position when the awning is extended
- No readjustment required in case of fabric elongation
- End positions individually adjustable
Product videos
SE Breeze-com - Awning drive with integrated wind detection
SELVE awning drive SE Breeze-com: Setting the wind sensitivity using a commeo handheld transmitter
Initial setup of the SE Plus(-RC), SEM Plus(-RC), SE Breeze-com using a switch, top with relief
Initial setup of the SE Plus(-RC), SEM Plus(-RC), SE Breeze-com using a setting switch, top without relief
Initial setup of the SE Plus(-RC), SEM Plus(-RC), SE Breeze-com using a setting switch, 2 fixed end points
Initial setup of the SE Plus-RC, SEM Plus-RC, SE Breeze-com using a handheld transmitter, top with relief
Initial setup of the SE Plus-RC, SEM Plus-RC, SE Breeze-com using a handheld transmitter, top with relief
Initial setup of the SE Plus-RC, SEM Plus-RC, SE Breeze-com using a handheld transmitter, 2 fixed end points
Universal setting switch for all drives (SE, SE RC and SE SMI; 4 or 5 wires)
Downloads
Technical details
| Type | SE Breeze-com 2/7 |
SE Breeze-com 2/10 |
SE Breeze-com 2/15 |
SE Breeze-com 2/20 |
SE Breeze-com 2/30 |
SE Breeze-com 2/40 |
SE Breeze-com 2/50 |
|
| Article no. | 38 48 20 |
38 48 40 |
38 48 50 |
38 48 60 |
38 48 70 |
38 48 80 |
38 49 90 |
|
| Torque at rated load Nm | 7 |
10 |
15 |
20 |
30 |
40 |
50 |
|
| Pulling force N | 220 |
310 |
460 |
610 |
920 |
1230 |
1530 |
|
| Rotation speed rpm | 17 |
17 |
17 |
17 | 17 | 17 | 17 | |
| Power rating W | 95 |
124 | 152 |
172 |
220 |
345 |
345 |
|
| Current consumption A | 0,41 | 0,55 | 0,66 | 0,75 | 0,95 | 1,5 | 1,5 |
|
| Voltage V | 230 | 230 | 230 | 230 | 230 | 230 | 230 | |
| Frequency Hz | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |
| Time of operation min | 4 | 4 | 4 | 4 | 4 | 4 | 4 | |
| Protective system | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | |
| Test mark | CE,VDE | CE,VDE | CE,VDE |
CE,VDE | CE,VDE | CE | CE |
|
| Limit switch range U | - | - | - | - | - | - | - | |
| Outer diameter mm | 45 | 45 | 45 | 45 | 45 | 45 | 45 |
|
| Cable length m | - | - | - | - | - | - | - | |
| Length L 1 mm |  |
497 |
497 |
522 |
537 |
557 | 566 |
566 |
| Length L 2 mm |
481 | 481 | 506 |
521 |
541 |
550 | 550 | |
| Length of square fixing pivot mm |
12 | 12 | 12 | 12 | 12 | 12 | 12 | |
Contact
Do you have any questions about our products? Then get in touch with us. We will answer you as quickly as possible.