Förklaringsvideor

För korrekt montering av SELVE-produkter

Smarta applikationer, bekväma inställningar: Med dessa nya videoguider är det enkelt att installera SELVES motorer och radiostyrningar steg för steg. Du hittar förklaringsvideor för radiosystemen commeo och iveo.

Vill du ändå läsa? SELVE-bruksanvisningar finner du under Nerladdningar.

Följ oss på YouTube för att inte missa några videos!

SELVE explains: Initial setting of several SELVE radio drives with the hand-held transmitter commeo Multi Send

The roller shutter drive SE Pro-RC combines the easy initial setting with functions that protect the roller shutter system and increase the service life of the roller shutter construction.

How fast and simple the initial setting of several SE Pro-RC successively with one commeo Multi Send is, will be shown in this explanation video.

SELVE explains: Splitting of SELVE radio drives to different commeo transmitters (with commeo transmitter)

In this explanation video, we will show you how three SELVE radio drives, that are programmed on a commeo transmitter / channel, can be split to different commeo transmitters / channels (previously: group separation).

Every drive can be selected individually; with just one keystroke another commeo transmitter / channel can be assigned additionally. Like this, it is easy to split up groups or to create group and central channels.

Here it is described how the drives can be activated with an already programmed commeo transmitter / channel.

SELVE explains: Splitting of SELVE radio drives to different commeo transmitters (via supply isolation)

In this explanation video, we will show you how three SELVE radio drives, that are programmed on a commeo transmitter / channel, can be split to different commeo transmitters / channels (previously: group separation).

Every drive can be selected individually; with just one keystroke another commeo transmitter / channel can be assigned additionally. Like this, it is easy to split up groups or to create group and central channels. Here it is described how the drives can be activated with supply isolation (power off once).

SELVE explains: Setting of intermediate and ventilation position at SELVE radio drives (-RC)

SELVE radio drives can memorize two additional positions next to the two end limit positions. These are called intermediate position (P1) and ventilation position (P2). They can be moved by double keystroke to UP (P1) or rather DOWN (P2) or by time controlled automatic moving demands. The light sensor moves in case of an overrun of the sun value into the intermediate position (P1). The intermediate position (P1) can be a partially sun shading at sunshine, the ventilation position (P2) maybe a position for the in the night opened ventilation slits of the roller shutter.

In this explanation video, we show you how to set the additional positions for several drives and how these can be approached.

SELVE explains: Resetting a SELVE radio drive into factory setting with commeo

In this explanation video, we will show you how a roller shutter radio drive can be reset into factory setting with a commeo transmitter.

SELVE explains: Programming of the light sensor commeo Light Send into several SELVE radio drives SE Pro-RC

The sun sensor commeo Light Send can be programmed (retrospectively) into SELVE radio drives without any problems and can control them in dependence of the light intensity.

In this explanation video the functions as well as the setting of the threshold values for the sun and dusk function of the light sensor will be shown.

SELVE explains: Shifting a SELVE radio drive (-RC) from iveo to commeo

SELVE radio drives with the indication “-RC” can be controlled with unidirectional iveo radio transmitters or with bidirectional commeo radio transmitters.

The shifting from with iveo controlled radio drives to the operation with commeo radio drives will be shown in this explanation video.

SELVE explains: Initial setting of the roller shutter radio drive SE Pro-RC with a commeo transmitter

In this explanation video, we will show you how fast and simple the initial setting of the roller shutter drive SE Pro-RC with a commeo transmitter works.

The roller shutter drive recognizes the upper and lower end limit positions automatically and saves those. Like this, the SE Pro-RC combines the easy initial setting with functions that protect the roller shutter system and therefore increase the service life of the roller shutter construction.

SELVE explains: Manual initial setting (lower end limit, upper end limit position) of SE Pro-RC with commeo

In this explanation video, we will show you how the end limit positions of the roller shutter radio drive SE-Pro-RC can be set manually. Especially during renovation it might be useful, due to the construction wise circumstances, to set the lower end limit position manually, while the system will move against the upper end limit position (for the automatic length compensation).

When burglar-proof fixations or blocking springs are built-in, a manual end limit position setting should always be executed.

SELVE explains: Manual initial setting (lower end limit, upper end limit) of SE Pro-RC with commeo           

In this explanation video, we will show you how the end limit positions of the roller shutter radio drive SE-Pro-RC can be set manually. Especially during renovation it might be useful, due to the construction wise circumstances, to set the lower and upper end limit position manually, e.g. because no end limit stops are available.

When burglar-proof fixations or blocking springs are built-in, a manual end limit position setting should always be executed.

SELVE explains: Manual initial setting (lower end limit, upper end limit position) of SE Pro-RC with burglar-proof fixations (commeo)

In this explanation video, we will show you how the end limit positions of the roller shutter radio drive SE Pro-RC can be set manually, in case the drive is used in conjunction with burglar-proof fixations or blocking springs. The manual end limit setting is important here so that the roller shutter slats in closed condition is also closed under pressure.

In this case a lower fixed end limit as end limit position will be set while the system will move against the upper end limit position.

This way of setting can also be executed with built-in fixing springs.

SELVE explains: Manual initial setting (lower end limit, upper end limit position) of SE Pro-RC with burglar-proof fixations (commeo)

In this explanation video, we will show you how the end limit positions of the roller shutter radio drive SE Pro-RC can be set manually, in case the drive is used in conjunction with burglar-proof fixations or blocking springs. The manual end limit setting is important here so that the roller shutter slats in closed condition is also closed under pressure.

In this case two fixed switching off end limits are set.

This way of setting can also be executed with built-in fixing springs.

SELVE explains: Initial setting of various SELVE radio drives SE Pro-RC with a commeo transmitter

In this explanation video, we will show you how fast and simple the initial setting of various SE-Pro-RC with a commeo transmitter works.

The roller shutter drive recognizes the upper and lower end limit position automatically and saves those. Like this, the SE Pro-RC combines the easy initial setting with functions that protect the roller shutter system and therefore increase the service life of the roller shutter construction.

SELVE explains: Setting of intermediate and ventilation position at SELVE radio drives (-RC)

SELVE radio drives can memorize two additional positions next to the two end limit positions. These are called intermediate position (P1) and ventilation position (P2). They can be moved by double keystroke to UP (P1) or rather DOWN (P2) or by time controlled automatic moving demands. The light sensor moves in case of an overrun of the sun value into the intermediate position (P1).

The intermediate position (P1) can be a partially sun shading at sunshine, the ventilation position (P2) maybe a position for the in the night opened ventilation slits of the roller shutter.

In this explanation video, we show you how to set the additional positions for several drives and how these can be approached.

SELVE explains: Resetting a SELVE radio drive into factory setting with commeo

In this explanation video, we will show you how a roller shutter radio drive can be reset into factory setting with a commeo transmitter .

SELVE explains: Commissioning and initial setup of the SELVE Home Server 2 with the app “SELVE Home”

In this explanation video we will show, how the SELVE Home Server 2 is put into operation with the app “SELVE Home”.

More information on SELVE Home can be found here.

SELVE explains: Initial setting of the roller shutter drive SE Pro in automatic setting mode

The roller shutter drive SE Pro combines the easy inital setting with functions that protect the roller shutter contruction optimally and consequently increases the service life of the roller shutter construction.

How quick and easy the initial setting of the SE Pro with a SELVE setting switch (or also with a normal switch) in the automatic setting mode is, will be shown in this explanation video.

SELVE explains: Initial setting of the roller shutter drive SE Pro in manual setting mode: (point / point)

The roller shutter drive SE Pro can also be set in the manual setting mode. Therefore, the SELVE setting switch is necessary. This setting will be selected, when the drive is used in connection with burglar-proof fixations or blocking springs and there is no fixed limit stop at the top.

In this explanation video fixed points are set as end positions at the bottom and at the top.

SELVE explains: Initial setting of the roller shutter drive SE Pro in manual setting mode: (point / end limit)

The roller shutter drive SE Pro can also be set in manual setting mode. Therefore, the SELVE setting switch is necessary. This setting will be selected, when the drive is used in connection with burglar-proof fixations or blocking springs but should be moved against the upper end limit.

In this explanation video a fixed point as end limit position will be set downwards, upwards the construction will move against the end limit.

SELVE explains: Setting of the 4-wired SELVE drive with a 5-wired SELVE setting cable

This explanation video shows how to connect a wired SELVE drive (4-wired connecting cable) with a setting cable for SELVE radio drives (5-wired connecting cable).

SELVE explains: Initial setting of the SELVE radio drive SEE-RC with a commeo transmitter

In this explanation video, we will show you how fast and simple the initial setting of the radio roller shutter drive SEE-RC with a commeo transmitter works.

The roller shutter drive recognizes both end limit position automatically and saves those. Like this, the SEE-RC combines the easy initial setting with functions that protect the roller shutter system and therefore increase the service life of the roller shutter construction.

In conjunction with SEE-RC burglar-proof fixations or blocking springs must be used.

SELVE explains: Initial setting and operating mode of the SELVE emergency and escape route drive SEE-NHK

In this explanation video, we show you the initial setting and operating mode of the roller shutter drive SEE-NHK, a drive with electronic switching off and emergency hand crank operation.

The roller shutter drive SEE-NHK recognizes the two end limit positions automatically and saves those. In case of an emergency (e.g. power failure) the system can easily be opened by the emergency hand crank. After the manual emergency opening of the roller shutter the drive will find the end limit positions independently. The SEE-NHK combines the emergency operation with functions that protect the roller shutter system and therefore increase the service life of the roller shutter construction.

In conjunction with SEE-NHK burglar-proof fixations or blocking springs must be used.

Roller shutter drive SELVE SP Rescue – developed to rescue lifes

In case of an emergency everything has to go really quick. That is why the SP Rescue can open the system at the escape and emergency exit with only one handgrip in a matter of seconds, even in case of a power failure. The solution is entirely mechanical and thereby absolutely maintenance-free.

How does that work? At manual unlocking a spring shaft will pull the system upwards and will open up the way to the outside. An absolute novelty on the market.

SELVE explains: The assembly of the emergency roller shutter drive SP Rescue

In this explanation video clip, we will show the assembly and the start-up of the roller shutter drive SP Rescue in 4 easy steps:

  1. Preparation of the octagonal steel shaft
  2. Preparation of the roller shutter box
  3. Setting of the preload and the end limit positions
  4. Test run

SELVE explains: Increase of preload at the SP Rescue

When the roller shutter stops half way after unlocking, but should move up completely, the preload can be increased.

We will show you in this explanation video, how a bigger opening width of the roller shutter after unlocking can be set.

 

SELVE explains: Decrease of preload at the SP Rescue

When the roller shutter moves up against the upper end limit after unlocking, but should stop half way, the preload can be reduced.

We will show you in this explanation video, how a reduction of the opening width of the roller shutter after unlocking can be set.

SELVE explains: Conversion of the spring shaft from right to left installation at the SP Rescue

In delivery state the spring shaft is intended for the “right installation“ of the drive. Please take a look into the instructions for the definition left and right installation.

We will show you in this explanation video, how the spring shaft can be converted to “left installation“ in a few easy steps.

SELVE explains: Disassembly of drive and spring shaft at the SP Rescue

In case a SP Rescue construction needs to be disassembled, it is important to first take the voltage out of the system.

In the position at which the fixing spring can be disassembled, the spring shaft is tensioned. We will show you in this explanation video, how the construction will be detensioned before the safe disassembly can be made.

SELVE explains: Accessory for a SP Rescue construction

This explanation video from SELVE shows of what components a SP Rescue construction compromises.

Included in the drive set:
drive, spring shaft and telescopic shaft

Please order these parts additionally as they are not included in the drive set:
motor bracket, bracket spring shaft and operation set (consisting of joint bearing, square / hexagonal bar and operating bar)

SELVE explains: Programming of an additional iveo transmitter into a SELVE radio drive

When a transmitter is already programmed into a SELVE radio drive, an additional transmitter or channel can be programmed easily.

Therefore a SELVE radio drive can also be programmed, next to a single operation, into one additional single transmitter or into one additional group and central transmitter.

SELVE explains: Separation of several SELVE radio drives from one iveo transmitter / channel to different iveo transmitters / channels ("group separation")

When two or more SELVE radio drives are programmed into one iveo transmitter / channel, it is possible to separate those onto different iveo transmitters / channels (group separation).

SELVE explains: Setting of intermediate and ventilation position at SELVE radio drives (-RC)

SELVE radio drives can memorize two additional positions next to the two end limit positions. These are called intermediate position (P1) and ventilation position (P2). They can be moved by double keystroke to UP (P1) or rather DOWN (P2) or by time controlled automatic moving demands. The light sensor moves in case of an overrun of the sun value into the intermediate position (P1).

The intermediate position (P1) can be a partially sun shading at sunshine, the ventilation position (P2) maybe a position for the in the night opened ventilation slits of the roller shutter.

In this explanation video, we show you how to set the additional positions for several drives and how these can be approached.

SELVE explains: Shifting a SELVE radio drive (-RC) from iveo to commeo

SELVE radio drives with the indication “-RC” can be controlled with unidirectional iveo radio transmitters or with bidirectional commeo radio transmitters.

The shifting from with iveo controlled radio drives to the operation with commeo radio drives will be shown in this explanation video.

SELVE explains: Differences between the radio sytems iveo and commeo

This explanation video explains the differences of the two SELVE radio systems “iveo/intronic” and “commeo”. This also clearly shows how to recognize to what radio system a certain drive or transmitter belongs.

SELVE explains: Resetting a SELVE radio drive into factory setting with iveo

In this explanation video, we will show you how a roller shutter radio drive can be reset into factory setting with an iveo transmitter.

SELVE explains: Initial setting of SELVE radio drive SE Pro-RC with an iveo transmitter

In this explanation video, we will show you how fast and simple the initial setting of the SE-Pro-RC with an iveo transmitter works.

The roller shutter drive recognizes the upper and lower end limit position automatically and saves those. Like this, the SE Pro-RC combines the easy initial setting with functions that protect the roller shutter system and therefore increase the service life of the roller shutter construction.

SELVE explains: Manual initial setting (point at the lower limit, upper limit stop) of the SELVE radio drive SE Pro-RC with an iveo transmitter

In this explanation video, we will show you how the end limit positions of the roller shutter radio drive SE-Pro-RC can be set manually. Especially during renovation it might be useful, due to the construction wise circumstances, to set the lower and upper end limit position manually while the system will move against the upper end limit position (for the automatic length compensation).

When burglar-proof fixations or blocking springs are built-in, a manual end limit position setting should always be executed.

SELVE explains: Manual initial setting (point at the lower limit, point at the upper limit) of the SELVE radio drive SE Pro-RC with an iveo transmitter

In this explanation video, we will show you how the end limit positions of the roller shutter radio drive SE Pro-RC can be set manually. Especially during renovation it might be useful, due to the construction wise circumstances, to set the lower and upper end limit position manually, e.g. because no end limit stops are available.

When burglar-proof fixations or blocking springs are built-in, a manual end limit position setting should always be executed.

SELVE explains: Setting of intermediate and ventilation position at SELVE radio drives (-RC)

SELVE radio drives can memorize two additional positions next to the two end limit positions. These are called intermediate position (P1) and ventilation position (P2). They can be moved by double keystroke to UP (P1) or rather DOWN (P2) or by time controlled automatic moving demands. The light sensor moves in case of an overrun of the sun value into the intermediate position (P1).

The intermediate position (P1) can be a partially sun shading at sunshine, the ventilation position (P2) maybe a position for the in the night opened ventilation slits of the roller shutter.

In this explanation video, we show you how to set the additional positions for several drives and how these can be approached.

SELVE explains: Resetting a SELVE radio drive into factory setting with iveo

In this explanation video, we will show you how a roller shutter radio drive can be reset into factory setting with an iveo transmitter.

SELVE explains: Differences between the radio sytems iveo and commeo

This explanation video explains the differences of the two SELVE radio systems “iveo/intronic” and “commeo”. This also clearly shows how to recognize to what radio system a certain drive or transmitter belongs.

SELVE explains: Setting of the 4-wired SELVE drive with a 5-wired SELVE setting cable

This explanation video shows how to connect a wired SELVE drive (4-wired connecting cable) with a setting cable for SELVE radio drives (5-wired connecting cable).

 

Utbildningar

Eftersom kunskap är makt

We are giving the sales and the assembly of our products in the hands of reliable and experienced specialist partners. Therefore it is very important to us that specialist partners are also familiar with our in part very different products and are always up to date with technology. Only like this, you can consult end customers perfectly, fulfill their requests and inspire them with innovative technology.

If you are interesting in a training, please talk to your sales force contact.

 

Mässor

Innovationer

Att vara närvarande är allt: SELVE deltar regelbundet som utställare på de viktigaste mässorna inom solskydds- och jalusi branschen. Både nationellt och internationellt presenterar vi våra produkter och intressanta nyheter. Den personliga kontakten med våra kunder är mycket viktig för oss.

Budskapet på våra mässor: kom, se, upptäck och upplev. För känn och försök - det är SELVE. Många rörelser i kombination med innovationer presenteras i vår nya designade monter.

Vi ser fram emot ditt besök!

 

Nedladdningar

 

CE dokument

 

Mjukvara / Uppdateringar