SEE

Roller shutter drive with plug & play setting

SEE, GR 1

SEE, GR 2

Product information

This plug & play drive for roller shutters combines simple end limit setting, maximum system protection and the tight closing of the shutters.

The drive SEE only has to be connected – it does not matter which end limit is approached first. After 3 learning cycles both end limit positions are approached smoothly and an optimal obstacle and overload detection is guaranteed.

SEE drives must be installed with blocking springs or burglar-proof fixations.

The drive is of course also available in the radio version SEE-RC in series 2 (from shaft with ∅ 50 mm).

TO CONTACT

PRODUCT BENEFITS

Plug & Play setting of end limits – sequence does not matter!
Obstacle detection in downward direction
“Reverse function”: Release of the obstacle
Learning overload protection in upwards direction, freeze up protection
Soft approach against the roller shutter box
Relief of the upper end limit position
Burglary resistant due to installation with burglar-proof fixations

Downloads

Im Moment gibts noch nichts zu sehen...

Technical details

Type	SEE 1/10	SEE 2/6-S	SEE 2/7	SEE 2/10	SEE 2/15	SEE 2/20	SEE 2/30
Article no.	38 03 43	38 43 20	38 23 20	38 23 40	38 23 50	38 23 60	38 23 70
Torque at rated load Nm	10	6	7	10	15	20	30
Effective shutter weight (kg) bei 1,5 m Rollladenhöhe	25	14	19	25	35	45	67
Effective shutter weight (kg) bei 2,5 m Rollladenhöhe	20	11	15	20	29	37	56
Shaft type	SW 40	SW 60	SW 60	SW 60	SW 60	SW 60	SW 60
Pulling force N	450	180	220	310	460	610	920
Rotation speed rpm	15	16	17	17	17	17	17
Power rating W	115	88	95	124	152	172	220
Current consumption A	0,50	0,38	0,41	0,55	0,66	0,75	0,95
Voltage V	230	230	230	230	230	230	230
Frequency Hz	50	50	50	50	50	50	50
Time of operation min	4	4	4	4	4	4	4
Protective system	IP44	IP44	IP44	IP44	IP44	IP44	IP44
Test mark	CE	CE	CE, VDE	CE, VDE	CE, VDE	CE, VDE	CE, VDE
Limit switch range U	-	-	-	-	-	-	-
Outer diameter mm	35	45	45	45	45	45	45
Cable length m	3	0	0	0	0	0	0
Length L 1 mm	508	393	497	497	522	537	557
Length L 2 mm	494	377	481	481	506	521	541
Length of square fixing pivot mm	12	12	12	12	12	12	12