SEZ-RC (Radio)

Drive for zip screens with wind gust detection (radio)

SEZ-RC, GR 1

SEZ-RC, GR 2

Product information

The protection of high-quality Zip-screens is what the SEZ drive focuses on. Many clever functions were combined in this drive so that for example briefly occurring wind gusts can be distinguished from real obstacles. SEZ drives are available with different motor head shapes and different basic crown diameters. The parallel connection of several SEZ drives is possible. After setting the end limit positions an automatic rotation detection will occur. Drives are available in series 1 (from shaft with Ø 40 mm) and series 2 (from shaft with Ø 50 mm). SEZ drives are dispatched without adapters. The adapters and the plug-in connecting cables for series 2 drives need to be ordered separately.

Due to the different motor head shapes and the basic crown diameters for series 2 drives, a consultation regarding the suitable type and the correct article number has to be made before ordering SEZ drives.

TO CONTACT

PRODUCT BENEFITS

Automatic setting of the end limit positions: up-down-ready!
Sensible obstacle detection in the downwards direction
“Reverse function”: Running against the obstacle three times
Detection of wind gusts in upwards direction, freeze up protection
Soft approach against the roller shutter box
Minimal relief of the upper end limit position
Guarantees safe retracting in case of wind alarm and central motion commands

Product videos

Initial setup of the SEZ(-RC) for zip screens using a setting switch, 2 fixed end points

Automatic initial setup of the SEZ-RC for zip screens using the commeo handheld transmitter

Initial setup of the SEZ-RC for zip screens using a commeo handheld transmitter, 2 fixed end points

Universal setting switch for all drives (SE, SE RC and SE SMI; 4 or 5 wires)

Downloads

Im Moment gibts noch nichts zu sehen...

Technical details

Type	SEZ 1/4-RC	SEZ 1/7-RC	SEZ 1/10-RC	SEZ 2/7-RC	SEZ 2/10-RC	SEZ 2/15-RC	SEZ 2/20-RC	SEZ 2/30-RC	SEZ 2/40-RC
Article no.	31 16 13	31 16 33	31 16 43	31 33 11	31 33 31	31 33 51	31 33 71	31 33 81	31 33 91
Torque at rated load Nm	4	7	10	7	10	15	20	30	40
Pulling force N	160	270	450	220	310	460	610	920	1230
Rotation speed rpm	30	20	15	17	17	17	17	17	17
Power rating W	115	115	115	95	124	152	172	220	345
Current consumption A	0,5	0,5	0,5	0,41	0,55	0,66	0,75	0,95	1,5
Voltage V	230	230	230	230	230	230	230	230	230
Frequency Hz	50	50	50	50	50	50	50	50	50
Time of operation min	4	4	4	4	4	4	4	4	4
Protective system	IP 44	IP 44	IP 44	IP 44	IP 44	IP 44	IP 44	IP 44	IP 44
Test mark	CE	CE	CE	CE, VDE	CE, VDE	CE, VDE	CE, VDE	CE, VDE	CE
Limit switch range U	-	-	-	-	-	-	-	-	-
Outer diameter mm	35	35	35	45	45	45	45	45	45
Cable length m	3	3	3	-	-	-	-	-	-
Length L 1 mm	508	508	508	505	505	530	545	565	566
Length L 2 mm	494	494	494	488	488	513	528	548	549
Length of square fixing pivot mm	12	12	12	12	12	12	12	12	12