SE Pro
Roller shutter drive with obstacle detection
SE Plus, GR 1
Product information
Specially developed for roller shutters, the SE Pro drive ensures the longevity of any roller shutter system. The specially designed motor head provides optimal sensitivity when obstacles are detected in the travel path. Another major advantage is the easy setting of the end positions.
SE Pro drives can be used with standard suspension springs. When using rigid shaft connectors or anti-lift devices, manual setting of the lower limit is recommended. In addition, the use is recommended exclusively in single-piece systems, as only then the full range of functions is guaranteed. Parallel connection of several SE Pro drives is possible.
Available in BR 1 (from SW 40) and BR 2 (from SW 50). BR 1 is delivered with adapters (SW 40). Adapters for BR 2, as well as the pluggable connection cable for BR 1 and 2, must be ordered separately!
PRODUCT BENEFITS
- Automatic setting of the end limit positions: up-down-ready!
- Sensible obstacle detection in the downwards direction
- “Reverse function”: Release of the obstacle
- Learning overload protection in upwards direction, freeze up protection
- Soft approach against the box
- Relief of upper end limit position
- Good & favourable: Installation
- with safety and fixing springs
Product videos
Initial setting of the roller shutter drive SE Pro in automatic setting mode
Initial setting of the roller shutter drive SE Pro in manual setting mode (point / point)
Initial setting of the roller shutter drive SE Pro in manual setting mode (point / end limit)
Universal setting switch for all drives (SE, SE RC and SE SMI; 4 or 5 wires)
Downloads
Technical details
| Type | SE Pro 1/6 | SE Pro 1/10 | SE Pro 2/6-S | SE Pro 2/7 | SE Pro 2/10 | SE Pro 2/15 | SE Pro 2/20 | SE Pro 2/30 | SE Pro 2/40 | SE Pro 2/50 | |
| Article no. | 41 02 20 | 41 02 40 | 41 41 00 | 41 21 10 | 41 21 30 | 41 21 50 | 41 21 70 | 41 21 80 | 41 21 90 | 41 22 93 | |
| Torque at rated load Nm | 6 | 10 | 6 | 7 | 10 | 15 | 20 | 30 | 40 | 50 | |
| Effective shutter weight (kg) at shutter height of 1.5 m | 14 | 25 | 14 | 19 | 25 | 35 | 45 | 67 | 88 | 102 | |
| Effective shutter weight (kg) at shutter height of 2.5 m | 11 | 20 | 11 | 15 | 20 | 29 | 37 | 56 | 72 | 83 | |
| Shaft type | SW 40 | SW 40 | SW 60 | SW 60 | SW 60 | SW 60 | SW 60 | SW 60 | SW 60 | SW 60 | |
| Pulling force N | 270 | 450 | 180 | 220 | 310 | 460 | 610 | 920 | 1230 | 1530 | |
| Rotation speed rpm | 15 | 15 | 16 | 17 | 17 | 17 | 17 | 17 | 17 | 12 | |
| Power rating W | 115 | 115 | 88 | 95 | 124 | 152 | 172 | 220 | 345 | 345 | |
| Current consumption A | 0,5 | 0,5 | 0,38 | 0,41 | 0,55 | 0,66 | 0,75 | 0,95 | 1,5 | 1,5 | |
| Voltage V | 230 | 230 | 230 | 230 | 230 | 230 | 230 | 230 | 230 | 230 | |
| Frequency Hz | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | 50 | |
| Time of operation min | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | |
| Protective system | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | IP 44 | |
| Test mark | CE | CE | CE | CE, VDE | CE, VDE | CE, VDE | CE, VDE | CE, VDE | CE, VDE | CE, VDE | |
| Limit switch range U | - | - | - | - | - | - | - | - | - | - | |
| Outer diameter mm | 35 | 35 | 45 | 45 | 45 | 45 | 45 | 45 | 45 | 45 | |
| Cable length m | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 3 | |
| Length L 1 mm |  | 519 | 519 | 399 | 505 | 505 | 530 | 545 | 565 | 574 | 574 |
| Length L 2 mm | 509 | 509 | 383 | 488 | 488 | 513 | 528 | 548 | 557 | 557 | |
| Length of square fixing pivot mm | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | 12 | |
Contact
Do you have any questions about our products? Then get in touch with us. We will answer you as quickly as possible.